Do not use the power socket on the wet vacuum extractor. Raise the scrub head to the transport position by stepping on. local Hilti Store or online at: www. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. - Do not allow children to play on or around machine. ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. Pulling on the. local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). - Report machine damage or faulty operation immediately. - Keep power cord away from heated surfaces. Follow the maintenance instructions provided on page 13 - 15 of this manual. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. To register your warranty online, visit us at • Usando uma chave de. FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. . máquina e anulará as proteções incluídas. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. Remove power cord plug from battery pack. 1. Keep all fasteners tight and be sure the power blower is in safe working condition. Power Up the Machine. ▷ Remove any adjusting key or wrench before turning the power tool on. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. ▷ Support panels or any oversized workpiece to minimize the risk.