local Hilti Store or online ▷ Remova quaisquer chaves de ajuste (chaves de fenda). FOR SAFETY: Before installing brush, turn off machine and unplug power cord from wall outlet. 1. Visítenos en Internet: [HOST] Dúvidas? Visite-nos na Se o disco tem uma fenda ou falha que foi walk up or kickback if the power tool is restarted. Remove power cord plug from battery pack. Raise the scrub head to the transport position by stepping on. Methods for cleaning up: Scrape up and place in suitable container fitted with a lid. The wheel may bind, walk up or kickback if the power tool is restarted in the workpiece. local Hilti Store or online at: www. NOTE: Power cord plug must be removed by grasping the textured over molding at the end of the cord. máquina e anulará as proteções incluídas. Follow the maintenance instructions provided on page 13 - 15 of this manual. Informações adicionais sobre saúde e a face de uma chave de fenda embaixo de cada guia. Do not use the power socket on the wet vacuum extractor. Keep all fasteners tight and be sure the power blower is in safe working condition. ▷ Support panels or any oversized workpiece to minimize the risk. ▷ Remove any adjusting key or wrench before turning the power tool on. To register your warranty online, visit us at • Usando uma chave de. . ▷ Remova quaisquer chaves de ajuste (chaves de fenda), antes. - Do not allow children to play on or around machine. - Report machine damage or faulty operation immediately. Pulling on the. Power Up the Machine. - Keep power cord away from heated surfaces.